Dean Pumps


Dean Pumps a Division of Met-Pro Corporation -Dean Pump® is recognized worldwide for high quality metallic pumps that handle a broad range of chemical process and industrial applications. We are particularly recognized for our ability to move high temperature liquids – hot oil/hot water – to 850° F (454° C). Major products and solutions include: chemical process pumps (horizontal ANSI, magnetic-drive, self-priming, and vertical), vertical inline pumps, water pumps, air-cooled high temperature pumps, and heavy-duty process pumps. Inquire about our skid-mounted/packaged solutions.

PFC Equipment offers a complete line of products and services for all fluid handling applications. We provide unmatched service and support in Minnesota, North Dakota, South Dakota, Iowa, and western Wisconsin. Our application experts will help you select the best pump, filter and control for your specifications. We also provide system design services for all markets and applications.

Dean Pumps pH Series Horizontal ANSI Process Pumps

Dean Data Pak

The pH Series chemical process pumps are built to ASME/ANSI B73.1 dimensions. Twenty-eight sizes are available in ductile iron, 316SS, DEAN PUMPSCD4MCu and Alloy 20 construction. Additional higher metal alloys (Hastelloy B or C, titanium, etc.) are available upon request.

  • Capacities to 3,200 GPM (726 m3/hr)
  • Heads to 800 feet (245 m)
  • Pumping temperatures to 500°F (260°C)
  • Working pressures to 375 PSIG (2,585 kPa)
  • Integral one-piece casing flanges
  • Fully open impeller
  • Heavy duty shaft and bearings
  • External impeller adjustment
  • Rigid bearing housing and casing feet

Ask about the 48 hour quick ship program


Dean Pumps pHP Series Self-Priming Chemical Process Pumps

Dean Data Pak

The pHP Series Pumps feature excellent priming times, power frame interchangeability with the pH Series (ANSI) chemical process pumps,dean pumps and suction lifts up to 20 feet (6.1 m). Five sizes are available in ductile iron or 316SS construction.

  • Capacities to 700 GPM (160 m3/hr)
  • Heads to 400 feet (120 m)
  • Pumping temperatures to 500°F (260°C)
  • Working pressures to 275 PSIG (1,896 kPa)

 

 

 

 


Dean Pumps pHV Series Vertical Sump Pumps

The pHV Series Vertical Sump Pumps are available for vented or vapor containing sumps and also can be configured for externally mounted dean pumps(dry pit) services. Sixteen sizes are available in ductile iron and 316SS construction.

  • Capacities to 1,600 GPM (360 m3/hr)
  • Heads to 200 feet (60 m)
  • Pumping temperatures to 220° F (104° C)
  • Working pressures to 275 PSIG (1,896 kPa)
  • Standard pump lengths to 15 feet (4.6 m)

 

 

 

 


Dean Pumps M300 Series Magnetic Drive ANSI Chemical Process Pumps

Dean Manual

The M300 Series Pumps are sealless, chemical process pumps built to ASME/ANSI B73.3 dimensions. Twelve sizes are available in ductile dean pumpsiron or 316SS construction. Other materials of constructions available upon request.

  • Capacities to 1200 GPM (270 m3/hr)
  • Heads to 475 feet (145 m)
  • Pumping temperatures to 350°F (177° C)
  • Working pressures to 275 PSIG (1,896 kPa)
  • Discharge-to discharge circulation
  • Silicon carbide bearings
  • Samarium cobalt rare earth magnets
  • Hastelloy-C containment shell

 

 


Dean Pumps DeanLine Series Industrial Inline Pumps

Dean Data Pak

DeanLine Series Industrial Inline Pumps are excellent for process plant pump applications for capacities and heads less than traditional ANSIdean pumps pumps. Two pump sizes are available in cast iron and 316SS construction.

  • Capacities to 95 GPM (22 m3/hr)
  • Heads to 130 feet (39 m)
  • Pumping temperatures to 220°F (104°C)
  • Working pressures to 100 PSIG (689 kPa)
  • Space saving design
  • Open impeller with integral seal
  • Single and three phase motors

 

 


Dean Pumps DL Series High Temperature Inline Pumps

Dean Data Pak

The DL Series vertical inline, close-coupled, pumps are excellent for high temperature chemical process applications. Seven sizes are available in ductile iron and 316SS construction.

  • Capacities to 800 GPM (182 m3/hr)
  • Heads to 550 feet (167 m)
  • Pumping temperatures to 550°F (288°C)
  • Working pressures to 275 PSIG (1,896 kPa)
  • Space saving design
  • Fully open impeller
  • Proprietary motor design

 

 

 


Dean Pumps CNV Series Inline Process Pumps

Dean Data Pak

The CNV Series Pumps are vertical inline, close-coupled, process pumps. Six sizes are available in ductile iron and 316 SS construction.dean pumps

  • Capacities to 700 GPM (160 m3/hr)
  • Heads to 550 feet (167 m)
  • Pumping temperatures to 220°F (104°C)
  • Working pressures to 275 PSIG (1,896 kPa)
  • Space saving design
  • Fully open impeller
  • JMV frame close-coupled motor designs

 

 

 


Dean Pumps RA Series Air Cooled Thermal Liquid/Hot Oil Pumps

Dean Data Pak

The RA Series Pumps are cost effective, hot oil, thermal liquid, heat transfer pumps that feature a shaft mounted fan to provide air flow over dean pumpsthe cooling fins of the pump. This air cooled design translates to NO WATER COOLING REQUIRED for the bearings and mechanical seals. Thirteen sizes are available in ductile iron construction.

  • Capacities to 1,100 GPM (250 m3/hr)
  • Heads to 425 feet (130 m)
  • Pumping temperatures to 650°F (343° C)
  • Working pressures to 350 PSIG (2,413 kPa)
  • Horizontal, end suction, back pull-out design
  • Centerline supported casing
  • 300 lb. RF flanges

 

 


Dean Pumps RWA Series Air Cooled Hot Water Pumps

Dean Data Pak

The RWA Series Pumps are heavy duty, high temperature pumps designed for use with hot water, ethylene glycol, propylene glycol, and dean pumpstriethylene glycol, in boiler feed, steam condensate, HVAC and other heat transfer applications. Pumps include a shaft mounted fan to provide airflow over the cooling fins of the pump. This air-cooled design translates to NO EXTERNAL WATER COOLING REQUIRED for the bearings and mechanical seal. Thirteen sizes are available in ductile iron construction.

  • Capacities to 1,100 GPM (250 m3/hr)
  • Heads to 425 feet (130 m)
  • Pumping temperatures to 400°F (205°C)
  • Working pressures to 450 PSIG(3,100 kPa)
  • Horizontal end suction, back pullout design
  • Centerline supported casing
  • 300 lb. RF flanges

 


Dean Pumps RAV/RWAV Series Air-Cooled Vertical Inline Thermal Liquid/Hot Water Pumps

Dean Data Pak

RAV/RWAV Series pumps feature a shaft mounted fan to provide air flow over the cooling fins of the pump. This air-cooled design translates dean pumpsto NO EXTERNAL WATER COOLING REQUIRED for the bearings and mechanical seal.

The RAV, designed specifically for use with hot oil, features six pump sizes in ductile iron construction.

The RWAV, designed specifically for use with hot water, ethylene glycol, propylene glycol, and tri-ethylene glycol, is also available in six sizes in ductile iron construction.

  • Capacities to 360 GPM (82 m3/hr)
  • Heads to 320 feet (98 m)
  • RAV pumping temperatures to 650°F (343°C)
  • RAV working pressures to 350 PSIG (2,413 kPa)
  • RWAV pumping temperatures to 400°F (204°C)
  • RWAV working pressures to 450 PSIG (3,103 kPa)
  • Space saving design
  • 300 lb. RF flanges
  • Standard C-face motors
  • Compatible to NEMA/IAC motor frame sizes
  • Minimizes alignment concerns

Dean Pump RMA5000 Series Magnetic Drive Air Cooled Process Pumps

Dean Pump Specs

The RMA5000 Series Pumps are sealless, air-cooled (or water-cooled), heavy duty process pumps. Air fin cooling reduces heat flow fromDEAN PUMPS process fluid to magnets. Seventeen sizes are available in steel or 316SS construction.

  • Capacities to 1,200 GPM (270 m3/hr)
  • Heads to 600 feet (180 m)
  • Pumping temperatures to 750°F (400°C)
  • Working pressures to 300 PSIG (2,068 kPa)
  • Centerline supported casing
  • Silicon carbide bearings
  • Samarium cobalt rare earth magnets
  • Hastelloy-C containment shell

 

 


Dean Pump R4000 Series Heavy Duty Process Pumps

Dean Data Pac

The R4000 Series Pumps are the single most applied pump for high temperature heat transfer service. These heavy duty, centerlinedean pumps supported, chemical, petrochemical, and refinery style process pumps are available in twenty-seven sizes in steel and 316SS construction.

  • Capacities to 6,500 GPM (1,476 m3/hr)
  • Heads to 800 feet (244 m)
  • Pumping temperatures to 850°F (455°C)
  • Working pressures to 500 PSIG (3,447 kPa)
  • Integral one-piece 300 lb. RF casing flanges
  • Closed impeller
  • Centerline supported casing
  • Heavy duty shaft and bearings

 


Dean Pump R5000 Series Heavy Duty API Type Process Pumps

Dean Data Pac

The R5000 Series Pumps are chemical, petrochemical, and refinery API type high temperature process pumps. Twenty-seven sizes are dean pumpsavailable in steel and 316SS construction.

  • Capacities to 6,000 GPM (1,363m3/hr)
  • Heads to 800 feet (244m)
  • Pumping temperatures to 850° F (455° C)
  • Working pressures to 500 PSIG (3,447 kPa)
  • Centerline supported casing
  • Large taper bore seal cavity or jacketed cylindrical stuffing box

 


Dean Pump RM5000 Series Magnetic Drive Heavy Duty
Process Pumps

Dean Pump Specs

RM5000 Series Pumps are sealless, heavy duty, chemical, petrochemical, and refinery style magnetic drive process pumps. Seventeen sizes are available in steel and 316SS construction.

  • Capacities to 1,200 GPM (270 m3/hr)
  • Heads to 600 feet (180 m)
  • Pumping temperatures to 400° F (205° C)
  • Working pressures to 325 PSIG (2,241 kPa)
  • Centerline supported casing
  • Enclosed impeller
  • Discharge-to-discharge recirculation
  • Silicon carbide bearings
  • Samarium cobalt rare earth magnets
  • Hastelloy-C containment shell
  • 300 lb. RF flanges

Dean Pump FW Water Pumps

Dean Pump Data Pac

The Series FW1200 Water Pump is the highest quality and most cost effective vertical or horizontal configured pumping equipment designed dean pumpsspecifically for commercial and/or recreational water applications. Two sizes are available in ductile iron construction (bronze impeller).

  • Two pump sizes
  • Ductile iron construction
  • Capacities to 3200 GPM (727 m3/hr)
  • Heads to 155 feet (47 m)
  • Working pressures to 100 psig (690 kPa)
  • Pumping temperatures to 250° F (121° C)
  • Optional integral strainer basket
  • Certified to NSF/ANSI Standard 50
  • Optional Scotchkote™ 134 coating on all internal wetted surfaces
  • Easy installation an operation
  • Large easy-grip hand knobs for strainer tank cover removal
  • No tools required for strainer basket cleaning/change-out
  • Stainless steel strainer basket for corrosion protection and durability