Submersible Waste Water & Sewage Pumps
Wastewater Submersible Sewage Pumps WS_D4 Series 3888D4
Applications
- Sewage Systems
- Flood and Pollution Control
- Dewatering Effluent
- Farms
- Hospitals
- Trailer Courts
- Motels
Features and Benefits
- Cast Iron, two vane semi-iron, non-clog impeller with pump-out vanes for mechanical seal protection
- Heavy Duty cast iron, volute type casing for maximum efficiency
- 4″ Flanged Discharge Size
- Designed for Continuous Operation
Wastewater Submersible Sewage Pumps WS_BHF Series 3887 BHF
Applications
- Homes
- Sewage Systems
- Dewatering Effluent
- Water Transfer
- Light Industrial
- Commercial Applications
Features and Benefits
- Cast Iron Enclosed, Non Clog Impeller with pump out vanes for mechanical seal protection
- Corrosion Resistant 300 Series Stainless Steel Shaft
- Designed for Continuous Operation When Fully Submerged
- Cast Iron flanged volute type casing for maximum efficiency
Wastewater Submersible Sewage Pumps 2WD / 3WD
Submersible 2″ Non-Clog Sewage Pumps Dual Seal with Seal Sensor Probe 2WD/3WD
Applications
- Sewage Systems
- Dewatering/Effluent
- Water Transfer
- Light Industrial
- Commercial Applications
Features and Benefits
- Cast iron, semi-open or enclosed, non-clog impeller; dynamically balanced with pump out vanes for mechanical seal protection. Optional silicon bronze impeller available
- Cast iron, flanged volute type casing for maximum efficiency
- Dual Mechanical Seals
- Seal Sensor Probe
- Corrosion resistant, 400 series stainless steel shaft
Wastewater Submersible Sewage Pumps WS D3 Series 3888D3
Applications
- Sewage Systems
- Flood and Pollution Control
- Dewatering Effluent
- Farms
- Hospitals
- Trailer Courts
- Motels
Features and Benefits
- Cast Iron, two vane semi-iron, non-clog impeller with pump-out vanes for mechanical seal protection.
- Heavy Duty cast iron, volute type casing for maximum efficiency.
- 2.5″ Solids Handling Capabilities.
- Designed for Continuous Operation
Wastewater Submersible Sewage Pumps WS_B Series 3886
Applications
- Homes
- Sewage Systems
- Dewatering Effluent
- Water Transfer
Features and Benefits
- 2″ Solids handling capabilities
- Discharge Size 2″ NPT
- Capacities up to 185 GPM
- Corrosion Resistant Stainless Steel Shaft
- Dynamically Balanced Non-Clog Impeller
- Total Heads up to 38 Feet
- Continuous Operation Design
Wastewater Submersible Sewage Pumps Dual Seal with Seal Sensor Probe 3SD
Applications
- Sewage Systems
- Flood and Pollution Control
- Dewatering Effluent
- Farms
- Hospitals
- Trailer Courts
- Motels
Features and Benefits
- Cast iron 2-vane, semi-open, non-clog impeller with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon Bronze available as an option
- Heavy duty cast iron volute type casing for maximum efficiency. 3″ flange conforms to 125 PSI ANSI standard. Built for A10-30 slide rail system.(See accessories)
- Dual Mechanical Seals
- 300 Series stainless steel keyed-design shaft.
- Seal Sensor Probe
Wastewater Submersible Sewage Pumps WS_BF Series 3887BF
Features and Benefits
- Cast Iron Semi-Open Non-Clog Impeller
- Cast Iron flanged volute type for maximum efficiency
- Corrosion Resistant 300 Series Stainless Steel Shaft
- Designed for Continuous Operation When Fully Submerged
Commercial Explosion Proof Wastewater Submersible Sewage Pumps 3SDX
3″ Discharge Submersible Sewage Pump with Explosion Proof Motor
Applications
- Designed for a variety of hazardous commercial and industrial applications
- Sewage Systems
- Flood and Pollution Control
- Dewatering Effluent
- Hospitals
- Trailer Courts
- Hotels and Motels
Features and Benefits
- Cast Iron, ASTM A48, Class 30, two vane, semi-open impeller with non-clog design and pump out vanes for mechanical seal protection
- Heavy duty gray cast iron, ASTM A48, Class 30, Volute type casing with 3″ 125# flanged, horizontal discharge conforming to ANSI standards
- Tandem mechanical seal system in an oil filled seal chamber. Each seal operates independently to ensure fail safe performance
- Explosion Proof Motor for use in hazardous locations. Rated Class 1, Groups C&D
Commercial Explosion Proof Wastewater Submersible Sewage Pumps
4″ Non-Clog 4NS
Applications
- Sewage Systems
- Flood and Pollution Control
- Industrial Dewatering
- Waste Water Treatment Plants
- Municipal and Subdivision Lift Stations
Features and Benefits
- Cast iron, two vane closed design impeller for high efficiency and maximum wear life. Optional bronze impeller available
- Replaceable bronze wear ring to renew the running clearances and efficiencies to original conditions
- Heavy duty cast iron, volute type casing for maximum efficiency
- Designed for Continuous Operation
- Dual Mechanical Seals
Wastewater Submersible Sewage Pumps 1DM/2DM
Applications
- Homes and farms
- Mobile home parks and motels
- Schools and hospitals
- Municipal package systems
- Industrial treatment systems
- Dewatering applications
Features and Benefits
- Casing: Corrosion resistant AISI 304 SS designed for long lasting performance
- Impeller: AISI type 304 stainless steel construction; two vane non-clog design for maximum pumping efficiency
- Mechanical Seal: Drive lube silicon carbide sealing faces; all metal components of AISI type 300 stainless steel running in protected oil chamber
- Discharge: 1.” and 2″ NPT for horizontal connection to rigid, flexible or guide rail piping connection.
- Shaft: AISI type 304 stainless steel high strength pump shaft with keyed and locking cap screw impeller fastening
- Pump Support Feet, Motor Shell and Lifting Handle: Constructed of AISI type 304 series stainless steel
- Elastomers: BUNA-N
Wastewater Submersible Sewage Pumps 1DV/2DV
Applications
- Dewatering applications
- Homes and farms
- Industrial treatment systems
- Mobile home parks and motels
- Municipal package systems
- Schools and hospitals
Features and Benefits
- 1 1/2 and 2″ Discharge on 1/2 and 3/4 hp and larger
- 1 3/8″ solid size on 1/2 HP; 2″ solids on 3/4 HP and larger
- AISI 304 SS Casing and Impeller
- Capacities to 130 U.S. GPM
- Continuous Duty Rated, Non-Overloaded Motor
- Vortex Design AISI type 304 SS Impeller
- Total Heads to 39 Feet
Submersible Grinder Pumps
Submersible Grinder Pumps 1GA & 2GA Optional Explosion Proof
Applications
- High head and pressure sewage systems for: Municipal
- Commercial
- Industrial
Features and Benefits
- Design: Capable of grinding municipal, commercial and industrial sewage.
- Cutter System: Designed to reduce sewage to a fine slurry.
- Impeller: Cast iron, semi-open, non-overloading multivane design with pump-out vanes for mechanical seal protection.
- Casing: Cast iron, volute type for high efficiency.
- Adaptable for slide rail system.
- Paint: Two coat paint system for superior surface protection.
- Float Leakage Sensor (FLS): a small internal float switch is used to detect the presence of water in the stator chamber. Standard on all models.
- Leakage Sensor Detector Circuit: The FLS, when activated, will cause the patented 24 volt MiniCAS monitoring relay to signal an alarm and, if desired, stop the pump.
- The MiniCAS 24 volt relay can be ordered separately for installation in a control panel by a UL or CSA certified panel shop or as a built-in option in our control panel.
Submersible Grinder Pumps with Dual Seal 1GD
Applications
- Designed for high head sewage applications where a gravity system is not practical
- Ideal for pressure sewage systems
Features and Benefits
- Silicon bronze, multi-vane semi-open impeller with pump-out vanes for mechanical seal protection
- Heavy duty cast iron, volute type casing for maximum efficiency
- Dual Mechanical Seals
- Optional Seal Sensor Cord located in oil-filled chamber
- Stainless Steel Shaft and Fasteners
Submersible Effluent Pumps
2ED Series Effluent Submersible Pumps
Goulds Submersible Effluent Pumps- Dual Seal with Seal Sensor Probe
Applications
- Farms
- Motels
- Hospitals
- Trailer courts
- Schools
- Industry
- Effluent systems
Features and Benefits
- Impeller: Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
- Casing: Cast iron volute type for maximum efficiency. 2″ NPT discharge.
- Dual Mechanical Seals Lower: Silicon Carbide vs. Silicon Carbide sealing faces. Stainless steel metal parts, BUNa-N elastomers. Upper: Carbon vs. ceramic sealing faces. Stainless steel metal parts, BUNa-N elastomers.
- Seal Sensor Probe: Located in oil-filled chamber. If pumpage should begin to leak past lower seal it indicates to pump control panel a fault has occurred. Requires optional Seal Fail Circuit in the control panel.
- Shaft: Corrosion resistant, stainless steel. Threaded design. Lock nut on all models to guard against component damage on accidental reverse rotation.
- Fasteners: 300 series stainless steel.
- Designed for continuous operation when fully submerged.
- Capable of running dry without damage to components.
3885WE Series Effluent Submersible Pumps
Submersible Effluent Pumps
Specifically designed for on-site wastewater treatment for the following:
Applications
- Homes
- Schools
- Effluent Systems
- Industry
- Farms
- Hospitals
- Trailer Courts
- Motels
Features and Benefits
- Impeller: Cast iron, semi-open, non-clog with pump-out vanes for mechanical seal protection. Balanced for smooth operation. Silicon bronze impeller available as an option.
- Casing: Cast iron volute type for maximum efficiency. 2″ NPT discharge.
- Mechanical Seal: Silicon Carbide vs. Silicon Carbide sealing faces.
- Stainless steel metal parts, BUNA-N elastomers.
- Shaft: Corrosion-resistant, stainless steel. Threaded design.
- Locknut on all models to guard against component damage on accidental reverse rotation.
- Fasteners: 300 series stainless steel.
- Designed for continuous operation when fully submerged.
- Capable of running dry without damage to components.
GSP0311 Series Effluent Submersible Pumps
Features and Benefits
- Premium quality pump to keep your basement dry
- Reliable Mechanical switch coupled with solid float for dependable performance
- Cast Iron Motor Housing allowing for optimal heat dissipation
- Approved for Residential use (CSA/CUS Listed).
- Premium Mechanical Seal design provides superior protection against sand and abrasive damage (Silicon Carbide/Carbon/BUNA)
- Engineered motor designed for peak hydraulic performance without overloading.
- Suction Strainer encompasses entire base – designed to reduce debris entry
- Corrosion resistant hardware for lifetime use
- 2 year warranty
GSP0511 Series Effluent Submersible Pumps
Features and Benefits
- Premium quality pump to keep your basement dry
- Reliable Mechanical switch coupled with solid float for dependable performance
- Cast Iron Motor Housing allowing for optimal heat dissipation
- Approved for Residential use (CSA/CUS Listed).
- Premium Mechanical Seal design provides superior protection against sand and abrasive damage (Silicon Carbide/Carbon/BUNA)
- Suction Strainer encompasses entire base – designed to reduce debris entry
- Engineered motor designed for peak hydraulic performance without overloading.
- Corrosion resistant hardware for lifetime use
- 2 year warranty
PE Series Effluent Submersible Pumps
Applications
- On-site wastewater treatment
- Mound Systems
- Effluent/Dosing Systems
- Low Pressure Pipe Systems
- Basement Draining
- Heavy Duty Sump/Dewatering
Features and Benefits
- Corrosion resistant construction
- Cast iron body
- Thermoplastic impeller and cover
- Upper sleeve and lower heavy duty ball bearing construction
- Motor is permanently lubricated for extended service life
- Powered for continuous operation
- All ratings are within the working limits of the motor
- Quick disconnect power cord, 20′ standard length, heavy duty 16/3 SJTW with NEMA 5-15P, three prong, 115 volt grounding plug
- Mechanical seal is carbon, ceramic, BUNA and stainless steel
- Complete unit is heavy dury, portable and compact
- Stainless steel fasteners
3871, EP04 & EP05 Series Effluent Submersible Pumps
Applications
- Effluent Systems
- Homes/Farms
- Heavy Duty Sump
- Water Transfer
- Dewatering
Features and Benefits
- EP04 Impeller: Thermoplastic semi-open design with pump out vanes for mechanical seal protection.
- EP05 Impeller: Thermoplastic enclosed design for improved performance.
- Casing and Base: Rugged thermoplastic design provides superior strength and corrosion resistance.
- Motor Housing: Cast iron for efficient heat transfer, strength, and durability.
- Motor Cover: Thermoplastic cover with integral handle and float switch attachment points.
- Power Cable: Severe duty rated oil and water resistant.
- Bearings: Upper and lower heavy duty ball bearing construction.
- Capable of running dry without damage to components.
LEP07 Series Effluent Submersible Pumps
Applications
- Effluent Systems
- Water Transfer
- Dewatering
- Heavy Duty Sump
Features and Benefits
- Corrosion-resistant construction.
- Stainless Steel motor casing and fasteners.
- Glass-filled thermoplastic impeller and casing.
- Bearing: Upper and lower heavy duty ball bearing construction.
- Motor is permanently lubricated for extended service life and is powered for continuous operation. All ratings are within the working limits of the motor.
- Hard coated 400 series stainless steel shaft for improved corrosion resistance.
- Optional float switch is adjustable for various liquid levels. Easily removed for direct pump operation or switch replacement.
- Complete unit is lightweight and portable.