• 9366 Deerwood Lane Maple Grove
  • 763-425-7890 / 800-328-2350
  • sales@pfcequip.com

Burks pumps direct drive

Burks pumps direct drive or motor operated centrifugal pump with bronze impeller, bronze shaft sleeve & cast iron case. The AC & AE Burks pumps can be furnished with a square flange on the suction flange for tank mounting.

  • Flows To: 1,100 g.p.m.
  • Heads To: 380 feet
  • Discharge: 3/4 inch to 4 inches
  • HP: 0.33- 75 
  • RPM: 1750 or 3450
Burks Pumps

Vertical inline Burks Pumps

Vertical inline Burks Pumps with mechanical seal replaceable wear ring along with enclosed bronze impeller. Easy maintenance with Burks pumps back pull out design.

  • Flows to: 80 g.p.m.
  • Heads to: 110 feet
  • Discharge: 1 1/2 inches
  • HP: 1/3-2 
  • RPM: 3500
Burks Pumps Vertical in-Line

Regenerative Burks pumps

Regenerative Burks pumps raceway sealing grooves, machined into the face of the raceway, match the impeller sealing grooves, minimizing water slippage and increasing delivery efficiency. Extended Life- Lok(R) adjustment allows for extended life, field adjustment, and restoring factor efficiency as hydraulic passage wears.

Models:

  • Flows To: 

    • 2.7 to 4.3 g.p.m.- CR
    • 1.0 to 32 g.p.m.- ES
    • 0.2 to 8.3 g.p.m.- ET
    • 0.3 to 8.3 g.p.m.- CT
    • 3.6 to 91.0 g.p.m.- EC & ED
    • 1.6 to 32.5 g.p.m. – CS

  • Heads To: 

    • 225 feet – CR
    • 350 feet – All Others

  • Discharge:

    • 1/2 inches – CR
    • 1 inches -All Others

  • HP: 1/4 – 5
  • RPM: 1750 or 3450
Regenerative Turbine Burks

Vertical Multi Stack Centrifugal Pump

Burks pumps vertical multi stack centrifugal pump uses a stainless steel double face shaft provides longer lasting impeller/shaft drive integrity. The suction / discharge casing housing are entirely made of stainless steel. Efficiency & noise reduction is in relation to special design of the stainless steel diffuser. Burks pumps offers optional thrust bearing for use with standard c-face motors.

  • Flows To: 600 g.p.m.
  • Heads To: 1350 feet
  • Discharge: 4 inches
  • HP: 1/4 – 60
  • Voltage: 120, 240, 480
  • RPM: 1750 or 3450
Burks pumps Vertical Centrifugal

Condensate Return Systems

Burks pumps Condensate Return Systems made of cast iron receiver tanks. Rated for temperatures up to 200 degrees Fahrenheit. Balanced bronze impellers. Float switch or alternator, Motor controls mounted and prewired.

  • Flows To: 80 g.p.m.
  • Heads To: 130 feet
  • Discharge: 1 1/4 inches
  • HP: 0.33 – 3
  • RPM: 3450
Burks pumps Condensate