Crane Deming Pumps includes Demersible Pumps for industrial applications with large solids. Their Ansi pumps that meet the Ansi B73.1 mounting specs. Their versatile split case pump designed for continuous use for hot or cold fluids. Vertical Process Pumps constructed of corrosion resistant alloys with space saving and always primed feature. Crane Deming pumps has solution’s for most application.
Materials of construction and performance highlights
- Flows To: 4,000 g.p.m.
- Heads To: 265 feet
- Discharge: 3-10″
- HP: 2 – 150
- Voltage:
- 1 phase 208, 230, 220 for 3”
- 3 phase 208, 230, 460, 575 for 3”, 4″, 6″, 8″, 10″
- 3 phase 208, 230, 460 for 4”
- 3 phase 400 for 4”, 6”, 8”
- RPM: 870, 1150, 1750, or 3450
- Max Solids: 4″ (4″ on 8″ & 10″ discharge pumps and 2.5″ on 3″ discharge pumps)
Key product characteristics and benefits
- 4″ spherical solids handling capability
- Heavy- duty cast iron construction
- Plug-n-Play Cords simplify maintenance
- Heavy duty, oil-lubricated motor bearings
- Ductile iron impellers
- Tapered shaft drive for smooth operation
Customize this product with the following features and materials
- Hard face seal materials
- Additional cord lengths
- Rail systems for easy installation and removal
- Break Away Fittings
- Leg kit for free standing applications
Best solution for the following operations
- General Drainage
- Storm Water Run-off
- Building Service
- Power and Utility Plants
- Pollution Control
Materials of construction and performance highlights
Column
- Models: Deming 4500, 4507-4508
- Flows To: 1,600 g.p.m
- Heads To: 160 feet
- Discharge: 1.5-8 inches
- HP: 0.25-100
- RPM: 1150, 1750, 3450
- Length: Sump depth 2-22 feet
Non- Clog
- Models: 7560
- Flows To: 3,600 g.p.m
- Heads To: 175 feet
- Discharge: 2-8 inches
- HP: 0.5-60
- RPM: 870, 1150, 1750
- Length: Sump depth 2-22 feet
Key product characteristics and benefits
- Always primed
- Compact Simplex or Duplex Design
- Leak proof
- Adjustable impeller
- Vented or vapor tight construction
- High temperature applications
- Cast iron or 316SS construction (4500)
- Utilize standard C-face motors
- Extensions for pit depths from 2 to 20 feet
Customize this product with the following features and materials
- Guide bearings for various applications
- Cast iron, bronze, 316SS liquid ends
- Undercover discharge
- Simplex/ duplex
Best solution for the following operations
- Elevator pits, basements, sump drainage, flood control, storm water, industrial process, condensation control, power plants, general dewatering service.
All purpose centrifugal pump meets B75.1 mounting specifications
Materials of construction and performance highlights
- Models: 3060 Series
- Flows To: 1,000 g.p.m
- Heads To: 650 feet
- Discharge: 1 – 4 inches
Key product characteristics and benefits
- ANSI dimension interchangeability on most sizes.
- Back pull out construction.
- Open design, accurately balanced, large smooth-contoured flow passages, superior solid and slurry handling ability.
- Back pumpout vanes to maintain clear liquid passage and reduce pressure at mechanical seal.
- Inboard and outboard lip seals protect bearing reservoir from contamination by moisture or outside liquids.
- Oil lubed bearing frame is standard
- Easy external impeller adjustment.
- Replaceable shaft sleeve option.
Best solution for the following operations
- Process Applications
- General Industrial
- Chemical, Petrochemical, pharmaceutical, pulp and paper, pwoer plants, pollution and water treatment, sugar mining.
Deming End Suction Centrifugal Pump comes in long couple or close couple
Materials of construction and performance highlights
- Models: 3000 and 4000 Series
- Flows To: 4,000 g.p.m
- Heads To: 780 feet
- HZ: 50 HZ Models Available
- RPM: 1750 or 3450
- HP: .33-60
- Discharge: 1-6 inches
Key product characteristics and benefits
- Close coupled or frame mounted motors
- Bronze impeller
- Packaging box or mechanical seal
- Renewable bronze shaft sleeve
- Renewable bronze suction cover ring
- Cast iron case
Customize this product with the following features and materials
- Stainless steel impellers (4000 series)
- Standard bronze fitted
- Ductile iron casing
- Mechanical seals for various applications and temperatures
- Packed stuffing box
- External flushing
- Shaft sleeves-bronze or stainless steel
- Single or double seal configurations
Best solution for the following operations
- General Water Service
- Chilled & Hot Water Systems
- Cooling Tower
- HVAC
- Industrial Processes
- Municipal Drinking Water
- Sprinkler & Irrigation Systems
Materials of construction and performance highlights
- Models: Series 3180
- Flows To: 1,400 g.p.m
- Heads To: 390 feet
- Discharge: 1 – 4 inches
- HP: 1/2 – 50
- RPM: 1750 or 3450
Key product characteristics and benefits
- Casing – Heavy one-piece casting with flanged suction and discharge on common center line.
- Impeller – Fully enclosed one-piece design. Balance chamber provides control of stuffing box pressure and limits axial thrust. Replaceable wear ring optional.
- Shaft & Sleeves – Renewable hook type shaft sleeve protects motor shaft against wear, extends beyond gland for maximum sealing.
- Top Pull-Out Simplifies Maintenance – Complete rotating assembly easily removed for inspection without disturbing piping. Full circle register protected by confined gasket assures permanent alignment.
- Stuffing Box Cover – Extra deep for five packing rings, lantern ring and split gland.
- Motor – Standard vertical close coupled JP motors available in various enclosures. Heavy shaft and short over hang provides less than .002 deflection at face of stuffing box.
- Interchangeability – Maximum interchangeability of components assures easy maintenance and reduced inventory requirements. The eleven casings and impellers may be grouped into any of the motor size ranges. Within each group, the shaft sleeve and mechanical seal components are identical.
- Dual Purpose Jack Screws – Built-in Jack Screws simplify removal and protect mechanical seal during disassembly. Packing box cover held securely in place on adapter after pull-out.
Customize this product with the following features and materials
- Replaceable wear ring
Best solution for the following operations
- General Industrial
- Process Applications
Deming horizontal and vertical dry pit pumps are compact in design to meet a wide range of service conditions. Solids handling pumps are available in 25 size configurations to meet specific requirements.
Materials of construction and performance highlights
- Models: 7100 Series
- Flows To: 5,000 g.p.m
- Heads To: 240 feet
- Discharge: 2-8 inches
Key product characteristics and benefits
- Capable of handling 3 to 5 inch solids.
- All iron construction
- Regreasable bearings
- 416SS shaft sleeve
- External impeller adjustment
- Choice of rotation
- Suction elbow with hand-hole cleanout on verticle styles
- Pump out vanes on back of impeller
- Mechanical seals available
Best solution for the following operations
- Sanitary Wastes
- Industrial Wastes
- Process Wastes
- Pollution Control
- Cannery & Meat Process Wastes
- Storm Water Runoff
Materials of construction and performance highlights
- Models: 5060 Single-Stage Series
- Flows To: 7,000 g.p.m
- Heads To: 500 feet
- Discharge: 1.5-12 inches
Key product characteristics and benefits
- Casing – Horizontally split, upper and lower half bolted and doweled to provide perfect alignment. Bearing supports are cast and bored integrally with lower half casing. Upper half easily removed for inspection and maintenance without disturbing piping. Casing wear rings are standard and are field replaceable.
- Impeller – Enclosed, double suction type, accurately machined and balanced for smooth operation. Impeller wear rings are standard on 8” discharge and larger sizes, optional on other sizes.
High Strength Shaft- High strength steel shaft with renewable shaft sleeves provides protection from corrosion and abrasion. - Compact Size – Overall equipment size and weight have been decreased, permitting larger capacity pumps to be installed in smaller areas.
- Materials of Construction – Bronze fitted and all iron are standard. Ductile iron, all bronze and stainless steel, are also available on most sizes.
- Stuffing Box – Extra deep stuffing box accepts minimum of five rings of packing or a seal cage. Wide range of mechanical seal options available to suit many applications.
- Advanced Design – Short, heavy shaft and close bearing centers limit shaft deflection and assure longer pump life with minimal maintenance.
- Long Life Ball Bearings – Cartridge mounted, double-row thrust bearing may be inspected or serviced without disturbing casing bolts or piping. Grease or oil lubrication is available.
- Maximum Interchangeability – Standardized parts simplify the design. Shafts, bearings, sleeves, seals and packing are identical within a power group.
Best solution for the following operations
- General Water Supply
- Booster Service
- Municipal Waterworks
- Water Circulation
Materials of construction and performance highlights
- Models: Series 4310-11, Series 5560
- Flows To:
- 500 g.p.m (Series 4310-11)
- 4,000 g.p.m (Series 5560)
- Heads To:
- 100 feet (Series 4310-11)
- 240 feet (Series 5560)
- Discharge:
- 1 -3 inches (Series 4310-11)
- 1 -10 inches (Series 5560)
- HP:
- .25 – 7.5 (Series 4310-11)
- 1 – 75 (Series 5560)
- RPM: 1150 or 1750
Key product characteristics and benefits
- Casing – Vertically split, end suction design. Double volute type on pumps with 3” and larger discharge.
- Impeller – Series 5560 pumps have semi-open type impeller with heavy vanes for outstanding performance. Back pump-out vanes on a semi-open impeller reduces pressure behind the impeller and limits axial thrust.
- Power Frame – Heavy duty, one piece cast iron, precision bored and machined to assure alignment of the rotating assembly. Series 4310-11 pumps are short set design. Series 5560 are available in 9”, 12”, and 15” extension lengths below the support plate.
- Shaft – High strength shaft is extra heavy for maximum loads with minimum deflection. Impeller is keyed to shaft and locked with impeller nut or large cap screw.
Best solution for the following operations
- Coolants
- Metal and Parts Washing
- Filtering
- Air Conditioning
- Pickling
- Circulation
- Paint Systems Plating
- Air Washers
- Pollution Control