Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 200 PSI (1,379 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, VR-1A, BPO-DMA and EY-2 materials
ASME/ANSI B73.1 conformance
High strength casings with 150lb. FF flanges
Continuous strand fiberglass construction
Integral shaft sleeve
Large capacity bearings
External impeller adjustment
Heavy duty shaft
FRP baseplates available
ISO/DIN/JIS flange configurations available
Fybroc Close Coupled – The corrosion resistant Series 1530 pumps provide the space and weight savings of a close coupled pump combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes are available.
Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 200 PSI (1,379 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, VR1A, BPO-DMA and EY-2 materials
Back pull-out design
Continuous strand fiberglass construction
Integral shaft sleeve
NEMA/IEC motors with JM shaft configuration
High strength casing with integral 150 lb. FF flanges
FRP baseplates available
ISO/DIN/JIS flange configurations available
Fybroc 2858 – The corrosion resistant Series 2858 pumps feature ISO standard dimensions. These pumps are available in five sizes.
Capacities to 325 GPM (75 m3/hr)
Heads to 340 feet (105 m)
Working temperatures to 250°F (121°C) for VR-1
Working pressures to 200 PSI (1,379 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, VR-1A, and BPO-DMA materials
High strength casings with integral flanges
Continuous strand fiberglass construction
Integral shaft sleeves
Large capacity bearings
External impeller adjustment
Heavy duty shaft
FRP baseplates available
Fybroc 3000 – The Series 3000 pump features a recessed impeller design. These corrosion resistant pumps provide smooth flow-through pumping for heavy duty application and are available in five sizes.
High strength casings with integral 150 lb. FF flanges
Tangential discharge connection
Back pull-out design
Power frame interchangeable with 1500/1600 series
FRP baseplates available
Fybroc Mag Drive 2530 – The corrosion resistant Series 2530 is a close coupled magnetic drive pump with fluid end built to ASME/ANSI B73.1 dimensions with FRP containment can. Ten sizes are available.
Working temperatures to 180°F (82°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 200 PSI (1,379 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, VR-1A, BPO-DMA and EY-2 materials
Silicon carbide shaft, sleeve bearing and thrust bearings
Self priming configurations available
FRP baseplates available
High strength casing with integral 150 lb FF flanges
ISO/DIN/JIS flange configuration available
Fybroc Self-Priming Mag Drive – The corrosion resistant Series 2630 is a close-coupled, self-priming, magnetic-drive sealless pump. Two sizes are available.
Working temperatures to 180°F (82°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 145 PSI (1,000 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, VR-1A, BPO-DMA and EY-2 materials
Replaceable volute extension
Substantial parts interchangeability with Series 2530 pumps
FRP baseplates available
High strength casings with integral 150 lb FF flanges
ISO/DIN/JIS flange configurations available
Fybroc Self-Priming 1600 – The corrosion resistant Series 1600 self-primers combine efficiency with excellent priming times and feature substantial parts interchangeability with Series 1500 pumps. Six sizes are available.
Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 175 PSI (1,207 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, BPO-DMA and EY-2 materials
Replaceable volute extension
FRP baseplates available
High strength casing with integral 150 lb FF flanges
ISO/DIN/JIS flange configuration available
Fybroc Self-Priming 1630 – The corrosion resistant Series 1630 offers the benefits of a close coupled pump integrated with the features of the Series 1600 pump. Six sizes are available.
Working Temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working Pressures to 175 PSI (1,207 kPa)
Fiberglass reinforced plastic (FRP) construction
VR-1, BPO-DMA and EY-2 materials
Replaceable volute extensions
FRP baseplates available
High strength casing with integral 150 lb FF flanges
ISO/DIN/JIS flange configurations available
Fybroc Sump Pump 5500 – The corrosion resistant Series 5500 vertical sump pump is a structurally superior, highly dependable pump suitable for the most difficult sump pump applications. Nineteen sizes are available.
Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 175 PSI (1,207 kPa)
Fiberglass reinforced plastic (FRP) construction
Lengths (settings) from 18 inches (457 mm) to 30 feet (9.1 m) with optional tailpipes
Split bearing design for east of maintenance
Shafts available in 316SS, Alloy 20, Titanium, Hastelloy or higher alloys
Replaceable lower/casing journal shaft sleeve available
FRP wrapped shafts available for short settings
Fybroc Drypit Sump Pump 5530 – The corrosion resistant Series 5530 pump is designed for the most difficult dry pit application. It offers space and weight savings combined with the ruggedness of a standard Series 5500 pump. Sixteen sizes are available.
Working temperatures to 250°F (121°C) for VR-1, 275°F (135°C) for EY-2
Working pressures to 175 PSI (1,207 kPa)
Fiberglass reinforced plastic (FRP) construction
FRP wrapped shafts
Multiple locations/orientations of overflow port available
Settings available to 36 inches (914 mm)
Fybroc Cantilever Sump Pump 7500 – The corrosion resistant Series 7500 pumps, with optional recessed impeller design, are available in lengths (settings) from 18 inches (457 mm) to 4 feet (1.2 m) with optional tailpipes. Nineteen sizes are available
Marine applications (ie. dewatering and barges/cargo unloading)
Other difficult sump pump services
Fybro Close Coupled Cantilever Sump Pump 7530 – The corrosion resistant Series 7530 pumps are designed for use on shallow recirculation sumps such as those found on liquid scrubbers. Five sizes are available.
close coupled pump combined with the ruggedness of a standard Series 1500 pump. Sixteen sizes are available.
available in five sizes.
provide smooth flow-through pumping for heavy duty application and are available in five sizes.
end built to ASME/ANSI B73.1 dimensions with FRP containment can. Ten sizes are available.
magnetic-drive sealless pump. Two sizes are available.
priming times and feature substantial parts interchangeability with Series 1500 pumps. Six sizes are available.
integrated with the features of the Series 1600 pump. Six sizes are available.
highly dependable pump suitable for the most difficult sump pump applications. Nineteen sizes are available.
dry pit application. It offers space and weight savings combined with the ruggedness of a standard Series 5500 pump. Sixteen sizes are available.
impeller design, are available in lengths (settings) from 18 inches (457 mm) to 4 feet (1.2 m) with optional tailpipes. Nineteen sizes are available
for use on shallow recirculation sumps such as those found on liquid scrubbers. Five sizes are available.
