MTH Pumps

MTH Pumps is a made in the USA manufacturer since 1965, that specializes in high pressure, low flow regenerative turbine pumps. They can produce as little as 5 PSI up to 1,000 PSI and anywhere from a 1/2 gallon to 150 gallons per minute. They are available in rugged cast construction iron, bronze, and stainless steel materials with a variety of sealing options. We have both horizontal and vertical models with a number of drive options including AC and DC volt motors or pedestal mountings. Every pump is 100% tested before it leaves our facility. MTH is an ISO certified company in a state-of-the-art, quality driven factory in Plano, Illinois

• Capacities to 5 GPM (19 LPM)
• Heads to 300 Feet (91 Meters)
• Temperatures to 250°F (120°C)
• Stainless Steel Construction
• Compact Size
• Top Suction and Discharge
• Adjustable Casing for Extended Service Life and Expanded
• Performance Envelope
• Optional Integral Relief Valve

• Capacities to 10 GPM
• Heads to 300 Feet
• Temperatures to 230°F

• Capacities to 24 GPM
• Heads to 600 Feet
• Low NPSH Requirements

• Capacities to 40 GPM
• Heads to 700 Feet
• Low NPSH Requirements

• Capacities to 40 GPM
• Heads to 2300 Feet
• Single or Multi-stage Units (up to 5)
• Horizontal Close Coupled
• Horizontal Flexible Coupled
• Vertical Close Coupled

• Flexible Coupled
• Capacities to 60 GPM
• Heads to 800 Feet
• Low NPSH Requirements on 240 • 280 Series

• Flexible Coupled
• Capacities to 150 GPM
• Heads to 1150 Feet
• Low NPSH Requirements on 250 • 260 • 270 Series

• Capacities to 105 GPM
• Heads to 153 Feet
• Horizontal Close Coupled

• 100% Solid Stainless Steel Construction
• Capacities to 25 GPM
• Heads to 92 Feet (40 PSI)
• Temperatures from -20° to 250°F
• End Suction and Top, Bottom, or Side Discharge
• 12VDC 1HP TENV Motor
• Weighs 48 LBS