Berkeley Clean Water Submersible Pumps
Berkeley® Upstaged 4” Submersible Pumps
What Does This Mean For You?
Better Performance
Beat the Competition
The New Standard in Reliability
MS Series Stainless Steel TrimLine 4″ Submersible Pumps
Precision-engineered, high-quality, rugged MS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water.
The TrimLine 5 & 7 GPM Series Pumps are 3-3/4″ maximum O.D. Heads to 1,150 feet and capacities to 10.5 GPM. Built to deliver long-term, trouble-free service
KEY FEATURES
- Narrow 3-3/4″ diameter
- Floating impeller design resists sand and reduces sand locking
- These pumps feature the SignaSeal staging system
- Corrosion-resistant stainless steel discharge
MS Series Stainless Steel 4″ Submersible Pumps
Precision-engineered, high-quality, rugged MS Stainless Steel Series Pumps deliver efficient, dependable performance even in rough, aggressive water. Heads to 1,950 feet and capacities to 65 GPM.
Built to deliver long-term, trouble-free service. Floating impeller design resists sand and reduces sand locking. These pumps feature the SignaSeal Staging System.
KEY FEATURES
- Floating impeller design resists sand and reduces sand locking
- These pumps feature the SignaSeal staging system
- Corrosion-resistant stainless steel body, intake, discharge, and fasteners
JP Series Composite TrimLine 4″ Submersible Pumps
Precision-engineered, corrosion-resistant JP Series Composite Pumps in 5 and 7 GPM deliver efficient, dependable performance even in rough, aggressive water. Heads to over 850 feet and capacities to 10 GPM. Built to deliver long-term, trouble-free service.
KEY FEATURES
- Proven SignaSeal Staging System floating stack design resists sand and reduces sand locking
- TrimLine Models in 5 GPM and 7 GPM models are Narrow at 3-3/4″ in Diameter
BK Series 4″ Submersible Pump
The BK Series 4″ Submersible Pumps in 5, 7, 10 and 20 GPM models offer dependable performance and value. BK Series pumps will handle dry run conditions.
Proven “Floating Impeller” staging system is designed with a corrosive resistance stainless steel wear surface that greatly reduces problems with abrasives and sand lock-up.
KEY FEATURES
Discharge – Tested-tough, fiberglass-reinforced thermoplastic, with proven internal check valve. Large wrench flats and rope hole.
Shell – 300-grade stainless steel pump shell offers high corrosion resistance.
Shaft – Hexagonal 3/8”, 300-grade stainless steel pump shaft; offers generous impeller drive surfaces.
Shaft Bearing – Exclusive self-lubricating Nylatron® bearing resists wear surface from sand.
Motor Bracket – Tested-tough, fiberglass reinforced thermoplastic; incorporates an integral suction screen.
Cable Guard – Corrosion resistant rigid PVC with 300-grade stainless steel fasteners.
JP Series Composite 4″ Submersible Pumps
Precision-engineered, corrosion-resistant JP Series Composite Pumps in 10, 15, 20, and 30 GPM deliver efficient, dependable performance even in rough, aggressive water. Heads to over 650 feet and capacities to 45 GPM. Built to deliver long-term trouble-free service.
KEY FEATURES
- SignaSeal Staging System with Floating Impeller Design Resists Sand and Reduces Sand Locking
Pentek® XE-6, 6″ Submersible Motor Series for Ag/Irrigation
The Pentek XE-6 submersible motor combines outstanding performance and durability with innovative and advanced design features to provide the perfect solution for your submersible motor needs.
KEY FEATURES
Encapsulated design – offers superior insulation, heat transfer properties, and stability to the motor windings.
Lower amp draw, higher efficiencies (vs leading 6″ submersible motors) = lower operating costs.
EXCLUSIVE – Advanced Protection System – provides three layers of defense against sand and debris intrusion:
- External sand slinger boot:
Features a labyrinth seal design to better capture any sand or debris, keeping it away from the shaft - Lip Seal:
Located below the sand slinger, providing an extra layer of defense - Mechanical seal – silicon carbide:
Excellent abrasion, wear, and corrosion resistance
Resists deflection in high-pressure, high-heat, and high-speed conditions
High thermal conductivity (heat dissipation)
Provides superior protection against sand intrusions