• 9366 Deerwood Lane N Maple Grove
  • 763-425-7890 / 800-328-2350
  • sales@pfcequip.com

Berkeley Jet Pumps, Shallow Well Pumps & Self-Primming pumps

SJH Series Stainless Steel Shallow Well Jet Pumps

Berkeley Specs

BERKELEY PUMPS

ClearJet models provide excellent performance with good pressure for wells to 25′ deep.  Self-priming after the priming chamber has been filled with water

KEY FEATURES
  • Stainless Steel Pump Body Provides Maximum Resistance To Corrosion
  • Built-In Jet Made of High Strength Thermoplastic Components
  • Mechanical Shaft Seal with Highly Polished Carbon-Ceramic Faces and Stainless Steel Components
  • Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contaminants
  • Dynamically Balanced Rotor is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
  • Heavy-Duty Ball Bearings:  Shielded, Permanently Lubricated Bearings, Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
  • Stainless Steel Pump and Motor Shaft Provides Maximum Corrosion Resistance; One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Cover Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Quality Pressure Switch with Fixed 20 PSI Differential

HN Series Shallow Well Jet Pumps

Berkeley Specs

berkeley pumps

ProJet HN models provide excellent performance with good pressure for wells to 25′ deep.  Self-priming after the priming chamber has been filled with water.

KEY FEATURES
  • Quality Construction Using Close-Grained Cast Iron
  • Built-In Jet and Nozzle Made of High Strength Lexan® for Maximum Resistance to Corrosion and Abrasion
  • Precision Molded Diffuser Means Pump Primes Faster and Handles More Air
  • NORYL® Impeller is Precision-Molded for Perfect Balance.  Ultra-Smooth for Highest Performance and Efficiency
  • Mechanical Shaft Seal is Precision Lapped and Highly Polished Carbon-Ceramic with Stainless Steel Parts.  Internal Design Guarantees Continuous Water Lubrication
  • Superior Insulation Materials On the Motor Windings Protect Against Excessive Moisture and Contaminants
  • Heavy-Duty Ball Bearings are Shielded and Permanently Lubricated.  Extensively Tested to Ensure Extended Life and Smooth Operation
  • Pressure Switch is Professional Quality.  Allows Adjustable Cut-In and Differential Settings (20 PSI)

SN Series ProJet Shallow Well Jet Pumps

Berkeley Specs

ProJet SN Series Pumps provide excellent performance with good pressure for wells to 25′ deep.  Self-priming after the priming chamber has been filled with water.

KEY FEATURES
  • Quality Close-Grained Cast Iron Body Plus Drain Port Provided for Easy Winterizing
  • Built-In LexanTM Jet Nozzle and Venturi for Maximum Resistance to Corrosion and Abrasion
  • Clean Out Plug Provided for Ease of Service
  • NORYL® Impeller is Precision Molded  for Perfect Balance … Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Means Pump Primes Faster, Handles More Air with Multi-Port, Precision Molded, Reinforced Polypropylene Diffuser
  • Carbon-Ceramic Mechanical Shaft Seal with Stainless Steel Parts
  • Superior Insulation Materials Protect Motor Windings Against Excessive Moisture and Contamination
  • Balanced Rotor Is Die Cast Under High Pressures and Dynamically Balanced for Uniform Performance and Greater Efficiency
  • Heavy Duty Ball Bearings are Shielded and Permanently Lubricated to Provide  Extended Life and Smooth Quiet Operation
  • Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Cover  Protects All Electrical Components from Dirt, Dust, and Insects ;  Ventilating Air Cannot Contaminate Vital Switching Components
  • Professional Quality Pressure Switch Has Adjustable Cut-In with Fixed Differential of 20 PSI

FN Series Cast Iron Shallow Well Jet Pumps

Berkeley Specs

The FN Series provides strong performance with good pressure for wells to 25′ deep.  Self-priming after the priming chamber has been filled with water.

KEY FEATURES
  • Close-Grained Cast Iron Body and Base are Specially Treated for Corrosion Resistance.  Drain Port Provided for Easy Winterizing
  • Built-In Jet Made of  High Strength Polycarbonate Nozzle and Venturi for Maximum resistance to Corrosion and Abrasion.  Clean-Out Plug Provided for Ease of Service
  • Noryl® Impeller is Precision Molded for Perfect Balance … Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Allows Faster Priming, Handles More Air With Multi-Port, Precision-Molded Reinforced Polypropylene
  • Carbon-Ceramic Mechanical Shaft Seal is Precision Lapped and Highly Polished.  Internal Design Guarantees Continuous Water Lubrication
  • Superior Insulation On Motor Windings Protects Against Excessive Moisture and Contamination …. Assures Prolonged Motor Life
  • Dynamically Balanced Die-Cast Rotor for Uniform Performance and Greater Efficiency
  • Heavy-Duty Ball Bearings are Sealed and Permanently Lubricated to Ensure Extended Life and Smooth Quiet Operation
  • Stainless Steel Pump and Motor Shaft Provide Maximum Corrosion Resistance.  One-Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Cover Protects All Electrical Components From Dirt, Dust, and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Professional Grade Pressure Switch Allows Adjustable Cut-In With Fixed Differential (20 psi)

Shallow Well, Cast Iron Jet Pump

Berkeley Specs

The FH Series Jet Pump provides best-in-class performance for shallow wells up to 25′ deep and flows over 20GPM.
KEY FEATURES
  • High performance and efficiency with high strength for longevity – Precision molded noryl® impeller with 300 grade stainless insert
  • High performance and efficiency with superior abrasion resistance – Precision molded reinforced polypropylene diffuser, nozzle and venturi
  • Facilitates plumbing of accessories and easy access to nozzle for cleanoutcast iron pump case with 1-1/4″ suction and 1″ discharge ports, two 1/4″ auxiliary pressure ports and cleanout plug
  • Positive alignment between pump case and motorRugged cast iron seal plate
  • Industry standard switch is easily field replaceable – Factory installed Square D pressure switch with fixed 20 pound differential and 1/4″ NPT port
  • Every pump unit is factory tested – Peace of mind for you and your customer

PN Series Corrosion-Resistant Shallow Well Jet Pumps

Berkeley Specs

PN Series pumps are corrosion- and abrasion-resistant and are ideal for wells with pumping levels of 25′ or less.

Self-priming after the pump housing is initially filled with water.  Capacities to 13 GPM.  Available in 1/2 or 3/4 HP models.

KEY FEATURES
  • Quality Constructed of Fiberglass-Reinforced Thermoplastic Polypropylene for Total Corrosion Resistance
  • Built-In Jet Assembly:  NORYL® Nozzle and Venturi
  • Precision-Molded Polycarbonate Impeller for Perfect Balance …. Ultra-Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Allows Pump to Prime Faster and Handle More Air
  • Heavy-Duty Motor With Stainless Steel Shaft and Dual Heavy Duty Ball Bearings
  • Dual Voltage Capability:  1/2 and 3/4 HP Models Have Dual Voltage Motors and are Shipped at the 230v Setting

HL Series Cast Iron Convertible Jet Pumps

Berkeley Specs

The ProJet HL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 – 1 HP models.  The ProJet HL convertible jets utilize the BERKELEY® built-in regulators offering easier priming and better range of performance from a complete line of shallow well, 4″ double pipe, 2″ and 3″ single pipe jet packages.

KEY FEATURES
  • Quality Close-Grained Cast Iron Pump Body is a Rugged One-Piece Unit, Specially Treated to Resist Corrosion.
  • NORYL® Impeller is Precision Molded for Perfect Balance ….. Ultra Smooth for Highest Performance and Efficiency

 

SL and SLJ Series Cast Iron Convertible Jet Pumps

Berkeley Specs

The ProJet SL convertible jet pumps offer a proven cast iron self-priming design available in 1/2 thru 1-1/2 HP models.  The ProJet SL convertible jets utilize BERKELEY® built-in regulators offering easier priming and better range of performance from a complete line of shallow well, 4″ double pipe, 2″ and 3″ single pipe jet packages.

KEY FEATURES
  • Quality Cast Iron Construction:  Pump Body is Rugged One-Piece Unit, Specially Treated to Resist Corrosion.  Drain Port Provided for Easy Winterizing
  • Precision Molded NORYL® Impeller for Perfect Balance….. Ultra Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Primes Faster, Handles More Air.  Multi-Port, Precision-Molded Reinforced Polypropylene
  • High Quality Pressure Switch With Adjustable Cut-In Setting.  Fixed 20 PSI Differential
  • Mechanical Shaft Seal With Precision Lapped Highly Polished Carbon-Ceramic Surfaces and Stainless Steel Construction
  • Superior Insulations Materials on Motor Windings Protect Against Excessive Moisture and Contaminants …. Assures Prolonged Motor Life
  • Balanced Rotor is Die Cast Under High Pressures for Uniform Performance and Greater Efficiency
  • Shielded, Permanently Lubricated Ball Bearings, Extensively Tested to Ensure Extended Life and Smooth, Quiet Operation
  • 416 Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Canopy Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components … The Most Common Cause of Motor Failure

FL and FLJ Series Cast Iron Convertible Jet Pumps

Berkeley Specs

FL Series Pumps feature a proven self-priming “convertible” design.  the same convertible jet can be attached to the pump for use in shallow well installations, or be utilized in 4″ or larger wells for use as a double pipe deep well jet.

FL Series Pumps provide high capacities up to 11 GPM … depths to 90 feet.  They are rated for 30-50 PSI operation

KEY FEATURES
  • Quality Cast Iron Construction:  Pump Body is Rugged One-Piece Unit, Specially Treated to Resist Corrosion.  Drain Port Provided for Easy Winterizing
  • Precision Molded Lexan® Impeller for Perfect Balance….. Ultra Smooth for Highest Performance and Efficiency
  • Precision Molded Diffuser Primes Faster, Handles More Air.  Multi-Port, Precision-Molded Reinforced Polypropylene
  • High Quality Pressure Switch With Adjustable Cut-In Setting.  Fixed 20 PSI Differential
  • Mechanical Shaft Seal With Precision Lapped Highly Polished Carbon-Ceramic Surfaces and Stainless Steel Construction
  • Superior Insulations Materials on Motor Windings Protect Against Excessive Moisture and Contaminants …. Assures Prolonged Motor Life
  • Balanced Rotor is Die Cast Under High Pressures for Uniform Performance and Greater Efficiency
  • Shielded, Permanently Lubricated Ball Bearings, Extensively Tested to Ensure Extended Life and Smooth, Quiet Operation
  • 416 Stainless Steel Pump and Motor Shaft for Maximum Corrosion Resistance.  One Piece Threaded Shaft for Positive Impeller Drive and Alignment
  • Dustproof Motor Canopy Protects All Electrical Components From Dirt, Dust and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components … The Most Common Cause of Motor Failure

PL Series Corrosion-Resistant Convertible Deep Well Jet Pumps

Berkeley Specs

Durability and corrosion resistance are built into every PL Series Pump due to the rugged fiberglass reinforced thermoplastic pump construction.  The engineered composite components are lightweight yet extremely resistant to sand and abrasive wear.  The non-corrosive design and exceptional strength assure years of trouble-free operation.

KEY FEATURES
  • Lightweight Rustproof Pump Body Is Made of Dura-Glas — Fiberglass Reinforced Thermoplastic.  All Components In Contact With Water Are Resistant To the Corrosive and Abrasive Forces Found In The Most Aggressive Water Conditions
  • Multi-Port, Reinforced Polypropylene Diffuser Design Primes Faster and Handles More Air
  • Precision Molded Noryl® Impeller Gives Perfect Balance and Ultra Smoothness for Highest Performance and Efficiency
  • Performance-Proven, Built-In Regulator is Adjustable For Best Performance On All Deep Well Installations.
  • Stainless Steel Shaft Seal Acts As Heat Sink To Provide Maximum Cooling of the Shaft Seal
  • Dustproof Canopy On Motor Completely Encloses Electrical Components and Provides Dust, Dirt and Insect Protection.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Permanently Lubricated, Heavy Duty Ball Bearings Ensure Smooth, Quiet Operation
  • Easy Serviceability Due to the Easy-To-Remove Stainless Steel Clamp.  Piping Does Not Have To Be Disturbed.   Seals Can Be Replaced In Just A Few Minutes

LT2 Horizontal Multi-Stage Jet / Centrifugal Series

Berkeley Specs

LT2 Series Multi-Stage jet pumps are the highest performing pumps available in the category. The LT2 Series Convertible Jets utilize the BERKELEY® built-in regulator, offering easier priming and better range of performance from a complete line of Shallow Well, 4″ Double Pipe, 2″, and 3″ Single Pipe Jet Packages. Pump may also be operated as a self-priming centrifugal (to 25 ft) to provide a wide range of high pressure applications.

KEY FEATURES
  • Automatic Pressure Regulator – Faster-acting and quieter design eliminates “hunting” for correct drive pressure.  New improved stem and guide are precisely molded to assure efficient, trouble-free performance on all deep wells.
  • Quality Construction – Close-grained cast iron pump body is a rugged, one-piece unit.  Specially treated to resist corrosion.  Drain port provided for easy winterization.
  • Precision Machined Diffusers – for faster priming
  • Mechanical Shaft Seal – Precision lapped  and highly polished carbon-ceramic, stainless steel construction.  Internal design guarantees continuous water lubrication for maximum protection
  • Polycarbonate Impellers – Precision molded for perfect balance, and ultra-smooth for highest performance and efficiency
  • Motor Windings – Superior insulation materials protect against excessive moisture and contaminants to ensure prolonged motor life
  • Dustproof Cover – All electrical components are protected from dirt, dust and insects by a dustproof canopy.  Ventilating air cannot contaminate vital switching components.  This eliminates the most common cause of motor failure
  • Balanced Rotor – Rotor is die cast under high pressures for uniform performance and greater efficiency, dynamically balanced
  • Heavy-Duty Ball Bearings – Shielded, permanently lubricated bearings are extensively tested to ensure extended life and smooth quiet operation
  • Pump and Motor Shaft – One piece threaded shaft for positive impeller drive and alignment.  Shaft is stainless steel for maximum corrosion resistance

Vertical Multi-Stage Deep Well Jet Pumps

Berkeley Specs

The MS Series Vertical Jet Pumps are the industry standard deep well jet pumps for over-the-well “bolt-on” installations.  These pumps include the pre-plumbed BERKELEY® external automatic regulator, pressure gauge, pressure switch, and a complete line of casing adapters to drive the 4″ double pipe or 2″ and 3″ single pipe jet packages.

KEY FEATURES
  • Automatic Pressure Regulator With a Faster Acting and Quieter Design Eliminates “Hunting” For the Correct Drive Pressure.  New Improved Stem and Guide are Precisely Molded to Assure Efficient, Trouble-Free Performance On All Deep Wells
  • Quality Built Precision Machined, Close Grained Cast Iron Body and Base Are Specially Treated to Resist Corrosion
  • Precision Molded Noryl Impellers for Perfect Balance.  Ultra-Smooth for Highest Performance and Efficiency
  • High Quality Pressure Switch With Adjustable Differential and Cut-In/Cut-Out Pressure Settings
  • Superior Insulation Materials Protect Motor Against Excessive Moisture and Contaminants to Ensure Prolonged Motor Life
  • Mechanical Shaft Seal Has Precision Lapped and Highly Polished Carbon-Ceramic Surfaces.  Internal Design Guarantees Continuous Water Lubrication For Maximum Protection
  • Dustproof Motor Cover Protects All Electrical Components From Dirt, Dust, and Insects.  Ventilating Air Cannot Contaminate Vital Switching Components
  • Dynamically Balanced Rotor is Die Cast Under High Pressure For Uniform Performance and Greater Efficiency
  • Heavy-Duty Permanently Lubricated Ball Bearings Are Extensively Tested To Ensure Extended Life and Smooth, Quiet Operation
  • One-Piece Stainless Steel Threaded Pump and Motor Shaft for Positive Impeller Drive and Alignment.

Jet Pump / Tank Combination Systems

Berkeley Specs

PRO-Source™ Water System Packages are handy and economical pump/tank packages for the professional contractor. The PRO-Source Water System Packages utilize the ProJet cast iron jet pumps and the dependable PRO-Source quality pressurized steel tanks.

Plumbing connections are made using galvanized fittings and 3-ply nylon reinforced vinyl tubing with stainless steel hose clamps. Ideal for installations where there is limited space.

KEY FEATURES
  • Rugged cast iron pump
  • Pre-charged steel pre-charged tank
  • Perfect for tight areas