Stan-Cor ANSI Pump Made of Solid Kynar

Designed specially for dirty, abrasive and corrosive process fluids

Stan-Cor ANSI Pump – 350 Feet • Flow Rates to 700 gpm

Stan-Cor ANSI Pumps are the standard for corrosion resistance and abrasive fluids. They offer solid uid ends (casing, backstan-cor ansi pump cover and impeller) in two different materials for chemical resistance and temperature limits. Because these sections are solid in Stan-Cor pumps, there is no loss of corrosion resistance from abrasion, dents, gouges, cavitation, vacuum, turbulence and permeability. Corrosive materials do not come in contact with any metal parts of the pump.

Stan-Cor Series pumps provide exclusive design advantages over all other centrifugal pumps.

For applications requiring durability and performance on dirty, difficult fluids, Stan-Cor pumps are by far the most cost-effective solution.

Stan-Cor Ansi Pump Patented Concentric Casing Advantages

Unlike volute-type centrifugal pumps, the Stan-Cor pump uses a unique concentric design that provides a constant, equal distance between the pump casing and the impeller at all times during pump operation. This greatly reduces turbulence and vibration, thereby extending the life of the mechanical seal and bearings.

In a conventional volute casing pump, water turbulence and eddies are created as the impeller passes the restrictive cut water area in the casing. These hydraulic imbalances in turn cause the drive shaft to de ect, which increases the loading on the bearings, and leads to premature mechanical seal failure. At near shut-off, the bearing loading is extremely high.

Stan-Cor Series pumps provide exclusive design advantages over all other centrifugal pumps. For applications requiring durability and performance on dirty, difficult fluids, Stan-Cor pumps are by far the most cost-effective solution.

 

50 Hz Pump Selection Chart