When it comes to general industrial, municipal, commercial and building service pumps, Weinman is widely recognized for quality, efficiency and economy. Weinman pumps are particularly adept in HVAC and water service applications. Weinman pumping equipment and systems are widely found in boiler feed or booster service, chilled or hot water, cooling tower condensate and sprinkler, ice storage and liquid circulation. General water services include potable water transmission, sump and sewage ejection, municipal and industrial water treatment.
PFC Equipment offers a complete line of products and services for all fluid handling applications. We provide unmatched service and support in Minnesota, North Dakota, South Dakota, Iowa, and western Wisconsin. Our application experts will help you select the best pump, filter and control for your specifications. We also provide system design services for all markets and applications.
Materials of construction and performance highlights:
- Column
- Models: S, SA, MG-VS, SM-VS, SML-VS
- Flows To: 1,500 g.p.m.
- Heads To: 90 feet
- Discharge: 1.5-6 inches
- HP: 0.25- 20
- RPM: 1150 or 1750
- Length: Sump depth up to 15 feet
- Non- Clog:
- Models: SM-VS, SML-VS
- Flows To: 800 g.p.m.
- Heads To: 100 feet
- Discharge: 3-4 inches
- HP: 0.25-20
- RPM: 1150- 1750
Key product characteristics and benefits:
- Always primed
- Compact Simplex or Duplex Design
- Adjustable impeller
- Vented or vapor tight construction
- Utilize standard C-face motors
- High temperature applications
- Semi- open or non- clog impeller design
Best solution for the following operations
Elevator pits, basements, sump drainage, flood control, storm water,industrial process, condensation control, power plants, general dewatering service & sewage.
Materials of construction and performance highlights:
- Specifications
- Models: Weinman C or S
- Flows To: 260 g.p.m.
- Heads To: 300 feet
- Discharge: 1, 1 1/2, and 2 inches
- HP: 0.33 – 20
- RPM: 1750 or 3450
Key product characteristics and benefits:
- Water gauge
- Drip proof (ODP) NEMA motors
- Top pull-out without disturbing piping
- Float switch or alternator pre-wired at factory
- Heavy duty cast iron or steel receiver in a wide variety of sizes
- Compact design for small floor footprint
Customize this product with the following features and materials:
- Controls can be custom designed and integrated into any application
- Isolation valves between receiver and pump flange are available
- Motor controls mounted and pre-wired
- Larger receiver sizes available up to 500 gallons
- Steel receivers standard to 150 gallons
- Cast iron receivers standard to 67 gallons
Best solution for the following operations
Condensate return systems & Boiler feed.
Materials of construction and performance highlights:
- Specifications
- Models: A, B, G and K Series, 375 and 575 Back Pull Out Series
- Flows To: 4,000 g.p.m.
- Heads To: 425 feet
- Discharge: 1-10 inches
- HP: 0.33- 200
- RPM: 1150, 1750, or 3450
- HZ: 50 HZ models available
Key product characteristics and benefits:
- Direct drive, motor operated
- Silicon brass impeller
- Steel shaft
- Extra deep stuffing box with seal cage
- Renewable bronze shaft sleeve
- Cast iron case
- Renewable bronze suction cover ring
- Weinman BPO is self-venting to simplify start-up and features a drop-in replacement design.
Customize this product with the following features and materials:
- Shaft sleeves-bronze or stainless steel
- External flushing
- Packed stuffing box
- Mechanical seals for various applications and temperatures
- Ductile iron casing
- Standard bronze fitted
Materials of construction and performance highlights:
- Specifications
- Models: LVM Vertical Split Case, L Horizontal Split Case, JD Multistage Split Case
- Flows To: 7,000 g.p.m.
- Heads To: 460 feet
- Discharge: 2-12 inches
Key product characteristics and benefits:
- Mounting – A separate, adjustable motor mounting plate can be doweled into place by the installer after coupling is aligned in fi eld to ensure accurate, lasting alignment. The pump is permanently bolted and doweled to the base at the factory to prevent pump movement and misalignment.
- Coupling – A spacer-type coupling is standard and allows easy replacement of seals and bearings without removing motor or casing top.
- Easy Maintenance – A thrust collar sleeve prevents the rotating assembly from dropping if a bearing should fail. A lip seal prevents liquid from entering the lower bearing housing.
- Easy Handling – Lifting holes placed in the top and side of the base make lifting and installation easier.
Best solution for the following operations
- Chilled & Hot Water Systems
- Domestic Water Booster System
- General Water Service
Materials of construction and performance highlights:
- Specifications
- Models: CV Series
- Flows to: 1500 g.p.m.
- Heads to: 310 feet
- Discharge: 1.5-4 inches
- HP: 0.5-60
- RPM: 1750 or 3500
Key product characteristics and benefits:
- Bronze Impellers
- Back pull-out design
- Mechanical seal
- Internal seal flush
- NEMA JM drip proof motor
- Removable bronze wear ring
- Pressure gauge tappings at suction & discharge flange
- Standard 125lb ANSI flange
Customize this product with the following features and materials:
- 250# Flanges
- Stainless steel shaft seal
- Ceramic or hi temp tungston carbide seals
- TEFC motors
- Ductile iron casing
- Standard bronze fitted
Best solution for the following operations
- Liquid Circulation
- Hydronic Heating & Cooling Systems
- Industrial
- Air Conditioning
- Heating