Hydra Cell seal less pumps are available in a metallic head or non-metallic head.
Max Pressure
- Metallic:
- F/G-20: 1000 psi (70 bar)
- F/G-21/22: 1500 psi (100 bar)
- Non-Metallic: All Models: 250 psi (17 bar)
Max Temperature
- Metallic Heads: 250°F (121°C) – consult factory for temperatures above 160°F (71°C)
- Non-Metallic Heads: 140°F (60°C)
Max Pressure
- Metallic Heads:
- D/G-03-X (including Kel-Cell)*: 1000 psi (70 bar)
- D/G-03-E (Kel-Cell)*: 1000 psi (70 bar)
- (non Kel-Cell): 1200 psi (83 bar)
- D/G-03-S, B, G: 1200 psi (83 bar)
- Non-Metallic Heads:
- All models: 250 psi (17 bar)
Max Temperature
- Metallic Heads: 2 50°F (121°C) – consult factory for temperatures above 160°F (71°C)
- Non-Metallic Heads: 140°F (60°C)
Max Pressure
- Metallic Heads:
- D/G-03-X (including Kel-Cell)*: 1000 psi (70 bar)
- D/G-03-E (Kel-Cell)*: 1000 psi (70 bar)
Max Temperature
- Metallic Heads: 250°F (121°C) – consult factory for temperatures above 160°F (71°C)
Max Pressure
- 2,500 psi (170 bar)
Max Temperature
- 250°F (121°C) – consult factory for temperatures above 160°F (71°C)
Max Pressure
- Non-Metallic: 250 psi (17 bar)
- Metallic: 1000 psi (70 bar)
- Slurry Duty (SD): 300 psi (21 bar)
Max Temperature
- Metallic: 250°F (121°C) – consult factory for temperatures above 160°F (71°C)
- Non-Metallic: Polypropylene: 120°F (49°C)
- Kynar, Celcon & Slurry Duty: 140°F (60°C)
- Consult factory for temperatures above 120°F (49°C)
Max Pressure
- 1000 psi (70 bar)
Max Temperature
- 250°F (121°C) – consult factory for temperatures above 180°F (82°C)
D15 & D17 Hydra Cell Pumps
Max Pressure
- (D/G-15-E Cam only);
- 2000 psi (140 bar) @ 1450 rpm;
- 2500 psi (170 bar) @ 1150 rpm
- 1500 psi (100 bar) @ 1750 rpm
Max Temperature
- 250°F (121°C) – consult factory for temperatures above 180°F (82°C)
Max Pressure
- 1500 psi (100 bar) @ 1750 rpm
- (D/G-17-E Cam only);
- 2000 psi (138 bar) @ 1450 rpm;
- 2500 psi (172 bar) @ 1150 rpm
Max Pressure
- Non-Metallic: 2 50 psi (17 bar)
- Metallic: 1000 psi (70 bar).
Max Temperature
- Non-Metallic: Polypropylene 120°F (49°C) – Kynar 140°F (60°C)
- Metallic: 2 50°F (121°C) – consult factory for temperatures above 160°F (71°C).
Max Pressure
- 1200 psi (83 bar)
Max Temperature
- 250°F (121°C) – consult factory for temperatures above 160°F (71°C)
- Maximum Pressure: 1500 psi (103 bar)
- Maximum Flow Rate: 96 gpm (366.1 l/min)
Diaphragm Pump Features
Versatile, Reliable Pumps for a Wide Range of Applications
- Compact design and double-ended shaft provide a variety of installation option
- Rugged construction for long life with minimal maintenance
- Lower energy costs than centrifugal pumps
- Hydraulically balanced diaphragms to handle high pressures with low stress
- Unique diaphragm design handles more abrasives with less wear than gear, screw or plunger pumps
- Can operate with a closed or blocked suction line and run dry indefinitely without damage, eliminating downtime and repair costs
- Low NPSH requirements allow for operation with a vacuum condition on the suction – positive suction pressure is not necessary
- Seal-less design eliminates leaks, hazards and the expense associated with seals and packing
- Maximum Pressure: 3500 psi (241 bar)
- Maximum Flow Rate: 45 gpm (170.4 l/min)
Diaphragm Pump Features
Versatile, Reliable Pumps for a Wide Range of Applications
- Pumps the full spectrum of low-to-high viscosity fluids.
- Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
- Simple, compact design reduces initial investment and lowers maintenance costs.
- Operational efficiency reduce energy costs.
- Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error.
- Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace
- Tolerates non-ideal operating conditions.
- Maximum Pressure: 5000 psi (345 bar)
- Maximum Flow Rate: 26 gpm (98.4 l/min)
Diaphragm Pump Features
Versatile, Reliable Pumps for a Wide Range of Applications
- Compact design and double-ended shaft provide a variety of installation options
- Rugged construction for long life with minimal maintenance
- Lower energy costs than centrifugal pumps
- Hydraulically balanced diaphragms to handle high pressures with low stress
- Unique diaphragm design handles more abrasives with less wear than gear, screw or plunger pumps
- Can operate with a closed or blocked suction line and run dry indefinitely without damage, eliminating downtime and repair costs
- Low NPSH requirements allow for operation with a vacuum condition on the suction – positive suction pressure is not necessary
- Seal-less design eliminates leaks, hazards and the expense associated with seals and packing
Max Pressure
- 5000 psi (345 bar)
Fluid Temperature
- [contact factory for temperatures outside this range]
- Minimum: 40 F (4.4 C)
- Maximum: 180 F (82.2 C)
Max Pressure
- 1500 psi (103 bar)
Max Temperature
- [contact factory for temperatures outside this range]
- Minimum: 40 F (4.4 C)
- Maximum: 180 F (82.2 C)
- Maximum Pressure: 144 bar (2100 psi)
- Maximum Flow Rate: 595 l/min (157 gpm)
Diaphragm Pump Features
Versatile, Reliable Pumps for a Wide Range of Applications
- Seal-less design eliminates leaks, hazards and the expense associated with seals and packing
- Low NPSH requirements allow for operation with a vacuum condition on the suction – positive suction pressure is not necessary
- Can operate with a closed or blocked suction line and run dry indefinitely without damage, eliminating downtime and repair costs
- Unique diaphragm design handles more abrasives with less wear than gear, screw or plunger pumps
- Hydraulically balanced diaphragms to handle high pressures with low stress
- Lower energy costs than centrifugal pumps
- Rugged construction for long life with minimal maintenance
- Compact design and double-ended shaft provide a variety of installation options